Jay Doscher

I've been really happy with my Bambu Labs X1C, and I will admit I was a little skeptical since Bambu sent so many "review units" to all the 3D printing influencers. Many times unless they say they return it, you should know they usually get to

Here's another quick post as I work through some utility prints here in the office. I previously posted a cage chassis for my newer 4 PC, 2 Monitor KVM switch. I have repurposed my older 2 PC version on the second workbench. I wanted a cage chassis for

Thank you all for your support- attached are the files for the 2 PC version of Level 1 Tech's KVM Switch for two computers and two DisplayPort monitors per computer. All are designed to be printed flat with no supports, and the photos show Bambu Lab's

This is the Fusion 360 source f3d file for the ARM Terminal v4. Remember these are released under Creative Commons Attribution, Non-Commercial. If you're interested in selling these on Etsy or similar, drop me a note at jay@doscher.com and we can discuss terms. Thank you all

Hi Patrons, thank you for your support! The zip file below has all the files. Please comment below with any questions. Cheers! 2/22/2024 Update: A supporter sent me a note that Bambu Studio appears to be showing several parts as cantilevered. This appears to be a bug in

Before we get too far into this post, it should be noted that most of the parts I used for this build were those on hand. Most of the design happened over a long weekend in late January 2024. For those of you that want to build this, the parts